Dear all authors, presenters, and participants of SENTA 2022,
SENTA 2022 will be held on 20 October 2022 that will be held in faculty of marine technology (MARTECH). The detail about the schedule is shown below.
Parallel session is divided to seven parallel rooms that scattered in the faculty of marine technology (MARTECH), ITS. Each Author is given 11 minutes in parallel session with following time description:
• 8 minutes for presenting the paper
• 3 minutes for question-and-answer session
Below is the distribution in each parallel room:
1st Room
Moderator: Erzad Iskandar Putra, S.T., M.T.
Place: BG Munaf Hall, 2nd floor of W Building, Department of Naval Architere, MARTECH, ITS
Start from 13.00 WIB
| Paper ID | Paper Title |
|---|---|
| 14 | LNG Type C, Cylindrical Weight Design Limitation Based on Shipbuiding Facilities |
| 21 | Technical and Economical Analysis of Shipyard Development using Advanced Outfitting Method for 2000 GT Shipbuilding Process |
| 23 | Resistance on Catamaran Decommissioning Unit: A Comparison of Numerical Analysis (Two Turbulence Models) to Model Test Result |
| 29 | Design Unmanned Minesweeper Catamaran as a Tool to Make a Safer Marine Environmental Using Analytical Methods |
| 30 | DESIGN AND MODIFICATION OF SMALL SEMI-DISPLACEMENT PASSENGER SHIPS |
| 43 | VULNERABILITY OF SHIP WITH A LARGE BREADTH TO DRAUGHT RATIO AGAINST EXCESSIVE ACCELERATION CRITERION |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 53 | Numerical Analysis of the Effect of a Foil-Shaped Centerbulb on Vertical Motion and Wake on a Catamaran Sightseeing Boat |
| 60 | Study of Design and Implementation of 3D Printing in The Development of Fiberglass Ship |
| 62 | CFD Analysis to Study Effects of Longitudinal Inhomogeneous Roughness on the Ship resistance |
| 66 | Analysis of the Construction and Operational Costs of a River Cruise Boat Made of Fully Laminated Bamboo Slats with Electric Paddle Wheel Drive |
| 77 | Preliminary Study of an Integrated Calculation of Ship Strength on Tankers with Applicable Regulations |
| 83 | Numerical Investigation on Drag and Lift of Hydrofoil due to Homogeneous Roughness |
2nd Room
Moderator: Muhammad Riduwan, S.Kom., M.Kom.
Place: W 101, 1st floor of W Building, Department of Naval Architere, MARTECH, ITS
Start from 13.00 (GMT+7)
| Paper ID | Paper Title |
|---|---|
| 4 | Exploration Study on Communication Protocol Trend of AIS Class B SOTDMA |
| 28 | Powering Design of Portable Dynamic Positioning Thruster for 150 FT Cable Laying Barge: A Case Study of Untung Jawa-Tanjung Pasir Submarine Power Cable Laying |
| 85 | Robust Control of Unmanned Surface Vehicles for Trajectory Tracking and Waypoint Control |
| 20 | HIT PROBABILITY OF SHOOTING IN A NAVAL WARFARE BETWEEN SURFACE COMBATANTS BY USING THE WEIGHTED BAYESIAN NETWORK METHOD |
| 39 | Application of Virtual Reality as an Alternative Training Media as Complement of Ship Bridge Simulator (Case Study: Port of Tanjung Emas Semarang) |
| 42 | Utilizing Virtual Reality Technology for Ship Bridge Simulator (Case Study: Port of Soekarno Hatta, Makassar) |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 81 | The Arrangement of Metaverse for Ship Bridge Simulator using Virtual Reality, Case Study: Tanjung Perak Port |
| 18 | Design Stealth Fast Attack Vehicle (SFAV) 18 Metres Using Numerical Method as Interceptor Boats |
| 31 | Propeller Performance Analysis on The Modification of Trailing Edge Shape as Anti-Singing |
| 38 | The Development of Ship Recycling Facility Cluster in Indonesia |
| 57 | Topology Optimization of Structural Strength Interceptor on Deep Planning Hull Ship |
| 84 | Sustainable Ship Health Monitoring for Side Hull Structure Using the Random Decrement Method. |
3rd Room
Moderator: Dr. Dendy Satrio, S.ST.
Place: W 116, 1st floor of WA Building, Department of Ocean Engineering, MARTECH, ITS
Start from 13.00 (GMT+7)
| Paper ID | Paper Title |
|---|---|
| 8 | Effect of Positioning a Circular Flow Disturbance in front of the Darrieus Turbine |
| 1 | Silica Gel Application in Fuel Tank Model Analysis to Reduce Palm Oil Biodiesel Degradation |
| 7 | STUDY OF SUPPLY CHAIN MANAGEMENT OF INDUSTRIAL PLAN MANUFACTURING DEVELOPMENT OF MARINE POWER TURBINE IN INDONESIA |
| 9 | EXPERIMENTAL STUDY OF THE INFLUENCE WAVE PERIOD ON THE PERFORMANCE DARRIEUS TURBINE WITH MODIFICATION OF THE BLADE ANGLE |
| 11 | EXPERIMENTAL STUDY ON HYDRODYNAMIC ASPECTS OF TURBINE WHICH CONVERT HYDROKINETIC AND POTENTIAL COASTAL WAVE ENERGY |
| 24 | GENERAL WAVE CHARACTERISTICS IN THE NORTH COAST OF JAVA ISLAND, INDONESIA |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 45 | AN EXPERIENCE IN OCEANOGRAPHIC SURVEY FOR DESIGNING 100 KW TIDAL CURRENT ENERGY CONVERSION SYSTEMS |
| 58 | Performance evaluation of permanent magnet synchronous generator (PMSG) on tidal power generation optimization |
| 64 | SPIRAL ANALYSIS OF VERTICAL CURRENTS IN LAMONG BAY |
| 67 | Study of Diameter-to-Draft Ratio of Pitch Point Absorber as Wave Energy Converter in Indonesia Waters Based on Boundary Element Method |
| 82 | Oceanographic Survey on Current due to Breaking Wave for Energy Generations: A Case Study of Pacitan Beach, East Java, Indonesia |
| 93 | Study of Vortex Effect to Vertical Axis Marine Current Turbine Arm |
4th Room
Moderator: Dr. Eng. Yuda Apri Hermawan, S.T., M.T.
Place: W 102, 1st floor of W Building, Department of Naval Architecture, MARTECH, ITS
Start from 13.00 (GMT+7)
| Paper ID | Paper Title |
|---|---|
| 97 | A Modest Numerical Simulation for Automatic Ship Collision Avoidance System |
| 15 | Validation of multiphase water wave propagation using smoothed particle hydrodynamics |
| 37 | Strength Analysis of Crane Hook Structure with Trapezoidal Cross Section Based on Rigging Configuration on the Upper Deck Lifting Process |
| 41 | Geology and seabed topographical research in support of the implementation of Indonesia’s submarine cable |
| 46 | Stability Analysis of a Catamaran Decommissioning Unit |
| 55 | FATIGUE LIFE ANALYSIS ON THE LOCAL CONSTRUCTION NEAR THE CHAIN STOPPER AREA OF PAPA TERMINAL FSO WITH 4X2 CHAIN LINE SPREAD MOORING CONFIGURATION |
| 59 | Experimental and Numerical Studies on Motion Response of Side-by-Side Two Floating Vessels in Waves |
| 65 | Mooring Analysis of Ocean Farm ITS (OFITS) |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 71 | Hotspot Stress Analysis of a two-planar DTY Tubular Joint Subjected to Axial Loading |
| 73 | Strength Analysis of Air Cooler Support Frame (ACSF) Platform due to Corrosion |
| 75 | A Study into the Effect of Tip Clearance on the Performance of B-Series and Kaplan-Series Ducted Propellers |
| 76 | The Effect of Geometric Parameters on Maximum Stress Concentration Factor of a Multi-planar DKT Tubular Joint |
| 89 | SELECTION OF MOORING SYSTEM CONFIGURATION OF A FSO USING MULTICRITERIA METHODS |
| 95 | Literature review of inspection within fixed offshore structures |
| 96 | Development of Penta Tubular AUV with Automatic Underwater Object Detection and Tracking Systems |
5th Room
Moderator: Oktaviani Turbaningsih, S.T., M.T.
Place: SEA 101, 1st floor of SEA Building, Department of Marine Transportation Engineering, MARTECH, ITS
Start from 13.00 (GMT+7)
| Paper ID | Paper Title |
|---|---|
| 2 | Exploring the Impact of Covid 19 on the Maritime Transport Sector |
| 5 | Risk Assessment of The LNG Loading Process on The Jetty Due to Larger LNG Vessel |
| 10 | FIRE RISK ASSESSMENT OF THE UNLOADING PROCESS IN NON-CONVENTION VESSEL WITH HAZARDOUS LIQUID |
| 19 | Analysis of Load Lashing Strength and Accident Risk Due to Front Load Binding on Non Conventional Ship. |
| 40 | RISK ACCIDENT ANALYSIS DUE TO THE EFFECT OF WRONG LOADING ON SHIP STABILITY |
| 48 | Effects of Adding Sideboard and Longitudinal Bulkhead Construction on Ship Stability of Open-Top Cargo Ship |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 49 | Conceptual Design and Operation Plan of Floating Medical Waste Treatment Facility for Archipelagic Area: A Case Study of Maluku and Papua |
| 50 | Fleet Ownership Model for Export Copper Shipment Concerning Downstream Mineral and Coal Policy in Indonesia |
| 54 | Performance Simulation of Hybrid Refrigeration System Using Eutectic Salt PCM For Eco Reefer Container |
| 74 | Risk Assessment of Jetty-Less LNG Transfer System For Onshore LNG Terminal |
| 90 | Contingency Plan of Failure Operation in Oil Fuel Terminal (TBBM) |
| 92 | Using Genetic Algorithms for Fleet Assignment Problem of Small-Scale LNG Supply Chain |
6th Room
Moderator: Fadilla Indrayuni Prastyasari, ST., M.Sc.
Place: WA 102, 1st floor of W Building, Department of Marine Engineering, MARTECH, ITS
Start from 13.00 (GMT+7)
| Paper ID | Paper Title |
|---|---|
| 69 | Formal Safety Assessment for Determining Sensitive Area Due to Traffic of Tourism Vessels at Lombok Strait |
| 32 | Analysis of hull performance on fast patrol boat with an extended study of survivability under damaged conditions |
| 33 | Fast Ship Prototype Design Simulation with Fin Stabilizer on Hydrodynamic Characteristics for Ship Realization Planning |
| 34 | Effect of Bilge Keel Variations on the Designed Fast Patrol Boats to Hull Resistance and Stability Behavior |
| 56 | Session Assessment of Seaplane Operations: The Case of Marine Tourism Development on Gili Iyang Island, Indonesia |
| 68 | Analysis of Locations and Waves Characteristic on Capsizing of RoPax Opened-Car-Deck |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 78 | Sail Technology on Fishing Vessel for Blue Swimming Crab Catching Application – A Review |
| 79 | Implementation of Metaverse for Modeling The Ship Bridge Simulator As Educational Means, Case Study: Tanjung Priok Port |
| 80 | The Development of The Internet of Things (IoT) Capacity on The 22nd Generation Sniffing Drone to Detect Oxygen Levels in Confined Space |
| 88 | Do people environmentally aware of the impact of climate change to their environment: the case of coastal people |
| 16 | Big Data Method to Grasp CO2 Emission of a Container Terminal Handling Machinery |
7th Room
Moderator: Sunarsih, S.T., M.Eng., Ph.D.
Place: WA 103, 1st floor of W Building, Department of Marine Engineering, MARTECH, ITS
Start from 13.00 (GMT+7)
| Paper ID | Paper Title |
|---|---|
| 86 | Approximation Method of Axial Forces on Network of Connectors for Modular Hexagonal Floating Structures |
| 13 | Improving Safety of Marine Cable Survey Operation through Safety Assessment using the Formal Safety Assessment Method (Case Study RV. Baruna Jaya) |
| 6 | Numerical investigation of the effect of methyl ester biodiesel fuel containing iodine on the diesel motors performance for eco-friendly ship |
| 44 | Design of Desalination Instrument for Coastal Area Using the Combination of Multiple Tray Aerator, Ultrafiltration, and Seawater RO Membrane |
| 70 | DESIGN OPTIMIZATION ON SEA WATER DESTILATION SYSTEM THAT UTILIZES EXHAUST GAS ON 300 GT FISHING VESSEL |
| 17 | Analysis of Fin Stabilizer Base on NACA 0010 in Fast Patrol Boat to Reduce Appendage Resistance on Numerical Method |
| 22 | GAP ANALYSIS OF THE MIDSHIP SECTION DESIGN CASE STUDY: KEY PLAN DRAWING ASSESSMENT FOR DUAL FUEL HARBOR TUGBOAT |
| Coffee Break (14.30 – 14.40 GMT+7) | |
| 26 | ANALYSIS OF TECHNOLOGY READINESS LEVEL OF TUG BOAT DUAL FUEL RESEARCH ACHIEVEMENT |
| 36 | RISK ANALYSIS OF DUAL FUEL TUG SHIP DESIGN IN MARITIME TECHNOLOGY DEVELOPMENT INNOVATION PROGRAM – BRIN |
| 25 | TECHNICAL AND ECONOMICAL STUDY ON LNG ON TANKER SHIP; CASE STUDY ON MEDIUM SPEED DIESEL ENGINE |
| 47 | Technical and Economical Feasibility Impact on Landing Craft Ship Conversion to Comply with Greenship Requirements |
| 72 | The Effect of Using Biodiesel B50 from Palm Oil on Lubricant Oil Degradation and Wear on Diesel Engine Components |
| 94 | Optimisation of Diesel Generator Fuel Oil Consumption using Particle Swarm for DC Distribution Radial and Zonal Type on Hybrid Powered Trimaran Ship |